Precision Power Atom Series 1000W Dual 4-Ohm Subwoofer

FEATURES:

The cast aluminum heatsink dust cap effectively absorbs and dissipates heat directly from the thermal voice coil, ensuring efficient heat management. The robust aluminum dust cap provides increased rigidity, eliminating flex and eradicating distortion during intense excursion. The dual poly-cotton suspension for the magnetic gap effectively dampens violent acceleration, ensuring the diaphragm's precise alignment. The hot-forged, one-piece T-yoke with a center pole and back venting further enhances the speaker's performance by incorporating venting milled into the T-yoke and backplate, which removes the conventional transfer.

SPECIFICATIONS:

The speaker boasts an impressive RMS power handling of 500W, with a mounting depth of 5.50 inches. Its resonance frequency (Fs) is 29.24 Hz, and the mechanical Q (Qms) is 5.86. The equivalent compliance volume (Vas) is 26.85 cubic feet, while the mechanical compliance (Cms) is 157.62 mm/N. The moving mass (Mms) is 179.45 grams, and the maximum linear excursion (Xmax) is 22.5 mm. The speaker's diameter is 10 inches, with a radiating surface area (Sd) of 1.00 square feet and a total displacement (Vd) of 2.00 cubic feet. The electrical Q (Qes) is 0.67, and the DC resistance (Re) is 3.93 ohms. The nominal impedance (Z) is 4 ohms, and the power handling (Pe) is 1,000 watts. The total Q (Qts) is 0.61, and the sensitivity (SPL 1W/1M) is 82.20 dB. The voice coil diameter (VC DIA) is 2.5 inches, and the voice coil impedance (VC) is 4 ohms. The dual voice coil (DVC) configuration maintains the 5.50-inch mounting depth.

product information: